IP address
source From Wikipedia, the free encyclopedia
For the Wikipedia user access level, see Wikipedia:User access levels#Unregistered_users.
An Internet Protocol address (IP address) is usually a numerical label assigned to each device (e.g., computer, printer) participating in a computer network that uses the Internet Protocol for communication.[1] An IP address serves two principal functions: host or network interface identification and location addressing. Its role has been characterized as follows: "A name indicates what we seek. An address indicates where it is. A route indicates how to get there."[2]
The designers of the Internet Protocol defined an IP address as a 32-bit number[1] and this system, known as Internet Protocol Version 4 (IPv4), is still in use today. However, due to the enormous growth of the Internet and the predicted depletion of available addresses, a new addressing system (IPv6), using 128 bits for the address, was developed in 1995,[3] standardized as RFC 2460 in 1998,[4] and is being deployed worldwide since the mid-2000s.
IP addresses are binary numbers, but they are usually stored in text files and displayed in human-readable notations, such as 172.16.254.1 (for IPv4), and 2001:db8:0:1234:0:567:8:1 (for IPv6).
The Internet Assigned Numbers Authority (IANA) manages the IP address space allocations globally and delegates five regional Internet registries (RIRs) to allocate IP address blocks to local Internet registries (Internet service providers) and other entities.
Contents
[hide]
1 IP versions
1.1 IP version 4 addresses
1.1.1 IPv4 subnetting
1.1.2 IPv4 private addresses
1.2 IPv4 address exhaustion
1.3 IP version 6 addresses
1.3.1 IPv6 private addresses
2 IP subnetworks
3 IP address assignment
3.1 Methods
3.2 Uses of dynamic addressing
3.2.1 Sticky dynamic IP address
3.3 Address autoconfiguration
3.4 Uses of static addressing
4 Public addresses
5 Modifications to IP addressing
5.1 IP blocking and firewalls
5.2 IP address translation
6 Diagnostic tools
7 See also
8 References
9 External links
[edit] IP versions
Two versions of the Internet Protocol (IP) are in use: IP Version 4 and IP Version 6. (The ostensible version gap between IPv4 and IPv6 is due to an experimental fifth protocol Internet Stream Protocol that was defined in 1979 but never officially designated IPv5. See IP version history for details.) Each version defines an IP address differently. Because of its prevalence, the generic term IP address typically still refers to the addresses defined by IPv4.
[edit] IP version 4 addresses
Main article: IPv4#Addressing
Decomposition of an IPv4 address from dot-decimal notation to its binary value.
In IPv4 an address consists of 32 bits which limits the address space to 4294967296 (232) possible unique addresses. IPv4 reserves some addresses for special purposes such as private networks (~18 million addresses) or multicast addresses (~270 million addresses).
IPv4 addresses are canonically represented in dot-decimal notation, which consists of four decimal numbers, each ranging from 0 to 255, separated by dots, e.g., 172.16.254.1. Each part represents a group of 8 bits (octet) of the address. In some cases of technical writing, IPv4 addresses may be presented in various hexadecimal, octal, or binary representations.
[edit] IPv4 subnetting
In the early stages of development of the Internet Protocol,[1] network administrators interpreted an IP address in two parts: network number portion and host number portion. The highest order octet (most significant eight bits) in an address was designated as the network number and the remaining bits were called the rest field or host identifier and were used for host numbering within a network.
This early method soon proved inadequate as additional networks developed that were independent of the existing networks already designated by a network number. In 1981, the Internet addressing specification was revised with the introduction of classful network architecture.[2]
Classful network design allowed for a larger number of individual network assignments and fine-grained subnetwork design. The first three bits of the most significant octet of an IP address were defined as the class of the address. Three classes (A, B, and C) were defined for universal unicast addressing. Depending on the class derived, the network identification was based on octet boundary segments of the entire address. Each class used successively additional octets in the network identifier, thus reducing the possible number of hosts in the higher order classes (B and C). The following table gives an overview of this now obsolete system.
Historical classful network architecture Class Leading
address bits Range of
first octet Network ID
format Host ID
format Number of networks Number of addresses
A 0 0 - 127 a b.c.d 27 = 128 224 = 16777216
B 10 128 - 191 a.b c.d 214 = 16384 216 = 65536
C 110 192 - 223 a.b.c d 221 = 2097152 28 = 256
Classful network design served its purpose in the startup stage of the Internet, but it lacked scalability in the face of the rapid expansion of the network in the 1990s. The class system of the address space was replaced with Classless Inter-Domain Routing (CIDR) in 1993. CIDR is based on variable-length subnet masking (VLSM) to allow allocation and routing based on arbitrary-length prefixes.
Today, remnants of classful network concepts function only in a limited scope as the default configuration parameters of some network software and hardware components (e.g. netmask), and in the technical jargon used in network administrators' discussions.
[edit] IPv4 private addresses
Early network design, when global end-to-end connectivity was envisioned for communications with all Internet hosts, intended that IP addresses be uniquely assigned to a particular computer or device. However, it was found that this was not always necessary as private networks developed and public address space needed to be conserved.
Computers not connected to the Internet, such as factory machines that communicate only with each other via TCP/IP, need not have globally-unique IP addresses. Three ranges of IPv4 addresses for private networks were reserved in RFC 1918. These addresses are not routed on the Internet and thus their use need not be coordinated with an IP address registry.
Today, when needed, such private networks typically connect to the Internet through network address translation (NAT).
IANA-reserved private IPv4 network ranges Start End No. of addresses
24-bit Block (/8 prefix, 1 × A) 10.0.0.0 10.255.255.255 16777216
20-bit Block (/12 prefix, 16 × B) 172.16.0.0 172.31.255.255 1048576
16-bit Block (/16 prefix, 256 × C) 192.168.0.0 192.168.255.255 65536
Any user may use any of the reserved blocks. Typically, a network administrator will divide a block into subnets; for example, many home routers automatically use a default address range of 192.168.0.0 - 192.168.0.255 (192.168.0.0/24).
[edit] IPv4 address exhaustion
Main article: IPv4 address exhaustion
IPv4 address exhaustion is the ultimate result of the decreasing supply of unallocated Internet Protocol Version 4 (IPv4) addresses available at the Internet Assigned Numbers Authority (IANA) and the regional Internet registries (RIRs) for assignment to end users and local Internet registries, such as Internet service providers. IPv4 provides for approximately 4.3 billion (232) addresses, divided into 256 /8 primary allocation blocks. IANA's primary address pool was exhausted on February 3, 2011 when the last 5 blocks were allocated to the 5 RIRs.[5][6] The first RIR to run out, APNIC, is expected to run out in April 2011.[7]
[edit] IP version 6 addresses
Main article: IPv6 address
Decomposition of an IPv6 address from hexadecimal representation to its binary value.
The rapid exhaustion of IPv4 address space, despite conservation techniques, prompted the Internet Engineering Task Force (IETF) to explore new technologies to expand the Internet's addressing capability. The permanent solution was deemed to be a redesign of the Internet Protocol itself. This next generation of the Internet Protocol, intended to replace IPv4 on the Internet, was eventually named Internet Protocol Version 6 (IPv6) in 1995[3][4] The address size was increased from 32 to 128 bits or 16 octets. This, even with a generous assignment of network blocks, is deemed sufficient for the foreseeable future. Mathematically, the new address space provides the potential for a maximum of 2128, or about 3.403×1038
unique addresses.
The new design is not intended to provide a sufficient quantity of addresses on its own, but rather to allow efficient aggregation of subnet routing prefixes to occur at routing nodes. As a result, routing table sizes are smaller, and the smallest possible individual allocation is a subnet for 264 hosts, which is the square of the size of the entire IPv4 Internet. At these levels, actual address utilization rates will be small on any IPv6 network segment. The new design also provides the opportunity to separate the addressing infrastructure of a network segment — that is the local administration of the segment's available space — from the addressing prefix used to route external traffic for a network. IPv6 has facilities that automatically change the routing prefix of entire networks, should the global connectivity or the routing policy change, without requiring internal redesign or renumbering.
The large number of IPv6 addresses allows large blocks to be assigned for specific purposes and, where appropriate, to be aggregated for efficient routing. With a large address space, there is not the need to have complex address conservation methods as used in Classless Inter-Domain Routing (CIDR).
Many modern desktop and enterprise server operating systems include native support for the IPv6 protocol, but it is not yet widely deployed in other devices, such as home networking routers, voice over IP (VoIP) and multimedia equipment, and network peripherals.
[edit] IPv6 private addresses
Just as IPv4 reserves addresses for private or internal networks, blocks of addresses are set aside in IPv6 for private addresses. In IPv6, these are referred to as unique local addresses (ULA). RFC 4193 sets aside the routing prefix fc00::/7 for this block which is divided into two /8 blocks with different implied policies (cf. IPv6) The addresses include a 40-bit pseudorandom number that minimizes the risk of address collisions if sites merge or packets are misrouted.
Early designs (RFC 3513) used a different block for this purpose (fec0::), dubbed site-local addresses. However, the definition of what constituted sites remained unclear and the poorly defined addressing policy created ambiguities for routing. The address range specification was abandoned and must not be used in new systems.
Addresses starting with fe80:, called link-local addresses, are assigned to interfaces for communication on the link only. The addresses are usually automatically generated by the operating system for each network interface. This provides instant automatic network connectivity for any IPv6 host and means that if several hosts connect to a common hub or switch, they have an instant communication path via their link-local IPv6 address. This feature is used extensively, and invisibly to most users, in the lower layers of IPv6 network administration (cf. Neighbor Discovery Protocol).
None of the private address prefixes may be routed in the public Internet.
[edit] IP subnetworks
IP networks may be divided into subnetworks in both IPv4 and IPv6. For this purpose, an IP address is logically recognized as consisting of two parts: the network prefix and the host identifier, or interface identifier (IPv6). The subnet mask or the CIDR prefix determines how the IP address is divided into network and host parts.
The term subnet mask is only used within IPv4. Both IP versions however use the Classless Inter-Domain Routing (CIDR) concept and notation. In this, the IP address is followed by a slash and the number (in decimal) of bits used for the network part, also called the routing prefix. For example, an IPv4 address and its subnet mask may be 192.0.2.1 and 255.255.255.0, respectively. The CIDR notation for the same IP address and subnet is 192.0.2.1/24, because the first 24 bits of the IP address indicate the network and subnet.
[edit] IP address assignment
Internet Protocol addresses are assigned to a host either anew at the time of booting, or permanently by fixed configuration of its hardware or software. Persistent configuration is also known as using a static IP address. In contrast, in situations when the computer's IP address is assigned newly each time, this is known as using a dynamic IP address.
[edit] Methods
Static IP addresses are manually assigned to a computer by an administrator. The exact procedure varies according to platform. This contrasts with dynamic IP addresses, which are assigned either by the computer interface or host software itself, as in Zeroconf, or assigned by a server using Dynamic Host Configuration Protocol (DHCP). Even though IP addresses assigned using DHCP may stay the same for long periods of time, they can generally change. In some cases, a network administrator may implement dynamically assigned static IP addresses. In this case, a DHCP server is used, but it is specifically configured to always assign the same IP address to a particular computer. This allows static IP addresses to be configured centrally, without having to specifically configure each computer on the network in a manual procedure.
In the absence or failure of static or stateful (DHCP) address configurations, an operating system may assign an IP address to a network interface using state-less auto-configuration methods, such as Zeroconf.
[edit] Uses of dynamic addressing
Dynamic IP addresses are most frequently assigned on LANs and broadband networks by Dynamic Host Configuration Protocol (DHCP) servers. They are used because it avoids the administrative burden of assigning specific static addresses to each device on a network. It also allows many devices to share limited address space on a network if only some of them will be online at a particular time. In most current desktop operating systems, dynamic IP configuration is enabled by default so that a user does not need to manually enter any settings to connect to a network with a DHCP server. DHCP is not the only technology used to assign dynamic IP addresses. Dialup and some broadband networks use dynamic address features of the Point-to-Point Protocol.
[edit] Sticky dynamic IP address
A sticky dynamic IP address is an informal term used by cable and DSL Internet access subscribers to describe a dynamically assigned IP address that seldom changes. The addresses are usually assigned with the DHCP protocol. Since the modems are usually powered-on for extended periods of time, the address leases are usually set to long periods and simply renewed upon expiration. If a modem is turned off and powered up again before the next expiration of the address lease, it will most likely receive the same IP address.
[edit] Address autoconfiguration
RFC 3330 defines an address block, 169.254.0.0/16, for the special use in link-local addressing for IPv4 networks. In IPv6, every interface, whether using static or dynamic address assignments, also receives a local-link address automatically in the fe80::/10 subnet.
These addresses are only valid on the link, such as a local network segment or point-to-point connection, that a host is connected to. These addresses are not routable and like private addresses cannot be the source or destination of packets traversing the Internet.
When the link-local IPv4 address block was reserved, no standards existed for mechanisms of address autoconfiguration. Filling the void, Microsoft created an implementation that is called Automatic Private IP Addressing (APIPA). Due to Microsoft's market power, APIPA has been deployed on millions of machines and has, thus, become a de facto standard in the industry. Many years later, the IETF defined a formal standard for this functionality, RFC 3927, entitled Dynamic Configuration of IPv4 Link-Local Addresses.
[edit] Uses of static addressing
Some infrastructure situations have to use static addressing, such as when finding the Domain Name System (DNS) host that will translate domain names to IP addresses. Static addresses are also convenient, but not absolutely necessary, to locate servers inside an enterprise. An address obtained from a DNS server comes with a time to live, or caching time, after which it should be looked up to confirm that it has not changed. Even static IP addresses do change as a result of network administration (RFC 2072)
[edit] Public addresses
A public IP address in common parlance is synonymous with a, globally routable unicast IP address.[citation needed]
Both IPv4 and IPv6 define address ranges that are reserved for private networks and link-local addressing. The term public IP address often used exclude these types of addresses.
[edit] Modifications to IP addressing
[edit] IP blocking and firewalls
Firewalls perform Internet Protocol blocking to protect networks from unauthorized access. They are common on today's Internet. They control access to networks based on the IP address of a client computer. Whether using a blacklist or a whitelist, the IP address that is blocked is the perceived IP address of the client, meaning that if the client is using a proxy server or network address translation, blocking one IP address may block many individual computers.
[edit] IP address translation
Multiple client devices can appear to share IP addresses: either because they are part of a shared hosting web server environment or because an IPv4 network address translator (NAT) or proxy server acts as an intermediary agent on behalf of its customers, in which case the real originating IP addresses might be hidden from the server receiving a request. A common practice is to have a NAT hide a large number of IP addresses in a private network. Only the "outside" interface(s) of the NAT need to have Internet-routable addresses.[8]
Most commonly, the NAT device maps TCP or UDP port numbers on the outside to individual private addresses on the inside. Just as a telephone number may have site-specific extensions, the port numbers are site-specific extensions to an IP address.
In small home networks, NAT functions usually take place in a residential gateway device, typically one marketed as a "router". In this scenario, the computers connected to the router would have 'private' IP addresses and the router would have a 'public' address to communicate with the Internet. This type of router allows several computers to share one public IP address.
[edit] Diagnostic tools
Computer operating systems provide various diagnostic tools to examine their network interface and address configuration. Windows provides the command-line interface tools ipconfig and netsh and users of Unix-like systems can use ifconfig, netstat, route, lanstat, ifstat, or iproute2 utilities to accomplish the task.
[edit] See also
Address pool
Classful network
Geolocation
Geolocation software
Hierarchical name space
Hostname: a human-readable alpha-numeric designation that may map to an IP address
Internet service provider
IP address spoofing
IP blocking
IP Multicast
List of assigned /8 IPv4 address blocks
MAC address
Ping
Private network
Provider-aggregatable address space
Provider-independent address space
Regional Internet Registry
African Network Information Center
American Registry for Internet Numbers
Asia-Pacific Network Information Centre
Latin American and Caribbean Internet Addresses Registry
RIPE Network Coordination Centre
Subnet address
Virtual IP address
WHOIS
[edit] References
^ a b c RFC 760, DOD Standard Internet Protocol (January 1980)
^ a b RFC 791, Internet Protocol - DARPA Internet Program Protocol Specification (September 1981)
^ a b RFC 1883, Internet Protocol, Version 6 (IPv6) Specification, S. Deering, R. Hinden (December 1995)
^ a b RFC 2460, Internet Protocol, Version 6 (IPv6) Specification, padnda'srockS. Deering, R. Hinden, The Internet Society (December 1998)
^ Smith, Lucie; Lipner, Ian (3 February 2011). "Free Pool of IPv4 Address Space Depleted". Number Resource Organization. Retrieved 3 February 2011.
^ ICANN,nanog mailing list. "Five /8s allocated to RIRs - no unallocated IPv4 unicast /8s remain".
^ Huston, Geoff. "IPv4 Address Report, daily generated". Retrieved 2011-03-19.
^ Comer, Douglas (2000). Internetworking with TCP/IP:Principles, Protocols, and Architectures -- 4th ed.. Upper Saddle River, NJ: Prentice Hall. p. 394. ISBN 0-13-018380-6.
[edit] External links
IP at the Open Directory Project
Understanding IP Addressing: Everything You Ever Wanted To Know